Guide On How To Make Colors On LED Lights?


What is the most recent social media trend? It’s TikTok, reels, and LED LIGHTS, according to our reports! In this fifteen-minute article, you’ll learn how to create some lavish tones by understanding DIY LED light color combinations. Therefore, let’s go to work!

If you’re someone who likes to follow ongoing trends, then you are most likely to know about the craze of color-changing LED lights going on all over social media platforms.

In case you’re wondering how to make colors on led lights –  then let us tell you that the process of making colors in LED strip lights is quite easy. 

LED strip lights acquire the ability to be divided by their types of color, such as single-color, or multi-color, which eventually includes dream color and RGB lights.

Being an RGB strip allows each piece of a LED strip light to contain red, green, and blue chips, which can provide red, green, and blue color lights on their own, and even illuminate any color of your liking by combining two or three chips.

Some LED strip lights like Lepro MagicColor LED light strips put IC chips into little drops of the RGB type, in which each of those IC chips tones with a pixel point. Modifying the hue or radiance of each pixel point allows it to create positive effects like streaming water, scanning, and more.  

How To Make Different Colors On LED Lights?

Although different brands may occasionally have slightly different controls, the majority of the catches are very similar. In order to demonstrate how to conduct DIY on LED lights, we will use the controller of Lepro RGB LED strip lights as an example.

In the wake of installing the LED strip lights, take out the controller and turn it on. You can see 20 pre-set shadings on static mode and pick one for your LED strip lights.

Press the down and up buttons on the DIY mode button zones to increase or decrease the lighting of the red, green, and blue basic tones and create other interesting LED light color combinations.

How To Make Peach On Led Lights?

You might be a fan of soft, peachy colors. To obtain them, complete the following!

If you want your lights to have a peach-like tone, use the following steps:

  • First press “DIY1”.
  • At that point press the change button.
  • Press red to build it by 7 seconds, green to diminish it by 2 seconds, and blue to diminish it by 2 seconds. This will effectively show a peach tone.
  • After this, press “DIY1” again for the distance to auto-save your shading change under “DIY1” mode.

Not so simple, huh? Take advantage of these methods and give them a shot regularly if you need extra tones.

Now, it is much easier to DIY LED light tones if you simply acquire a sharp RGB strip rather than attempting to complete the process manually. Launch the Lepro LampUX program.

Whether you require a heartfelt lavender tone or a sweet peach tone, the stock range may provide the shade you need at the touch of a button, allowing you to freely change the environment and style of your area. The most practical kind of remote-controlled LED color-changing lights, wouldn’t you say?

How To Make Black On LED Lights?

Are you wondering if you can create a black light using the colors of LED light? This instruction booklet was put together to show you how to create a black using LED light strips. You should be able to use locally available products to create your dark lights using LED strips before the end of this guide.

Technique 1: Using A Remote Control

You need to buy excellent LED strip lights that come with a controller for everything to work well. When buying LED lights, make sure to inquire and check the box because not all of them do this.

What you will need?

  • LED Light Strips
  • Distant controller
  • Stable Power Source


  • Introduce and associate the strips to the force source appropriately.
  • Turn on your LED light strips.
  • Press any DIY Color Setting button on the distance.
  • Press the red shading button approximately 25 times.
  • Press the blue shading button a similar number of times.
Using A Remote Control

This amazing direct connection results in the shade of black. Your LED light strips will begin to change color as you push the buttons on your controller until you achieve the perfect black color.

Technique 2: Using Transparent Tape

There is a manual technique to regulate each LED light in the strip to give you comparable results if you don’t have a distance or it ruins your route. This method relies on physically blocking visible light to retain UV rays.

Typically, this method is used to convert cell phone LED stripes into black lights. If you want to create a dark light with a few LED strips, we advise using this technique.

What You Need?

  • White LED light strip
  • Transparent tape
  • A purple and a blue marker


  • Check the number of individual LEDs in the strip.
  • Cut little bits of the transparent tape, identical to the number of LEDs, in gatherings of three.
  • Put the main piece of tape on each LED and shade them blue with the marker.
  • Layer it with the second piece of tape in general and shade them blue also.
  • Add the third piece on each and shade them purple.
  • Guarantee you cover each light.
  • Switch on your white LED light strip and give it a shot.

And in end, you’ll have the ideal shade of color for your beautiful place.


Therefore, this is probably all the information you need to use these subtle yet simple techniques to create different colors with LED lights to give your space the dreamy and fashionable mood you want!

Read More: Get the Best Ways On How To Fix A Lighter That Won’t Spark

Shreen Kawaski
Shreen Kawaski is an author at dstkrt-london and she holds a bachelor’s degree in home construction and accessories.

Recent posts


Please enter your comment!
Please enter your name here